2021年_湖南大学轻量化技术与安全防护研究中心

研究成果
/ Achievement

联系我们
/ Contact Us

Email：
pangtong2011@163.com, sgy800@126.com
通讯地址：
湖南省长沙市岳麓区湖南大学机械与运载工程学院

论文

Machine learning based topology optimization of fiber orientation for variable stiffness composite structures

Xu Yanan, Gao Yunkai, Wu Chi, Fang Jianguang, Sun Guangyong, Steven Grant P., et al.
International Journal for Numerical Methods in Engineering. 2021;122(22):6736-55.
doi: https://doi.org/10.1002/nme.6809.
Surrogate-Assisted Differential Evolution with Region Division for Expensive Optimization Problems with Discontinuous Responses

Wang Y., Lin J., Liu J., Sun G., Pang T.
IEEE Transactions on Evolutionary Computation. 2021:1-.
doi: 10.1109/TEVC.2021.3117990.
Parallelized optimization design of bumper systems under multiple low-speed impact loads

Sun Guangyong, Wang Xuesong, Fang Jianguang, Pang Tong, Li Qing.
Thin-Walled Structures. 2021;167:108197.
doi: https://doi.org/10.1016/j.tws.2021.108197.
Injury biomechanics-based nondeterministic optimization of front-end structures for safety in pedestrian–vehicle impact

Lei Fei, Lv Xiaojiang, Fang Jianguang, Pang Tong, Li Qing, Sun Guangyong.
Thin-Walled Structures. 2021;167:108087.
doi: https://doi.org/10.1016/j.tws.2021.108087.
Nondeterministic multi-objective and multi-case discrete optimization of functionally-graded front-bumper structures for pedestrian protection

Lei Fei, Lv Xiaojiang, Fang Jianguang, Li Qing, Sun Guangyong.
Thin-Walled Structures. 2021;167:106921.
doi: https://doi.org/10.1016/j.tws.2020.106921.
Measurement of fracture parameters based upon digital image correlation and virtual crack closure techniques

Huo Xintao, Luo Quantian, Li Qing, Sun Guangyong.

Composites Part B: Engineering. 2021;224:109157.
doi: https://doi.org/10.1016/j.compositesb.2021.109157.
Mechanical characterization and numerical modeling on the yield and fracture behaviors of Polymethacrylimide (PMI) foam materials.

Huo Xintao, Jiang Zhongcheng, Luo Quantian, Li Qing, Sun Guangyong.
International Journal of Mechanical Sciences. 2021:107033.
doi: https://doi.org/10.1016/j.ijmecsci.2021.107033.
On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review

He Wentao, Wang Linfeng, Liu Huancai, Wang Changzi, Yao Lu, Li Qing, et al.

Thin-Walled Structures. 2021;167:108026.
doi: https://doi.org/10.1016/j.tws.2021.108026.
Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures

Guangyong Sun, Zhen Wang, Hang Yu, Zhihui Gong,Qing Li.
Composite Structures, 209, 535-547.
DOI: https://doi.org/10.1016/j.compstruct.2018.10.051
Correction to: Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials

Jianguang Fang, Chengqing Wu, Timon Rabczuk, Chi Wu, Guangyong Sun,Qing Li.
Computational Mechanics.
DOI: https://doi.org/10.1007/s00466-021-02011-7
Fatigue behavior of carbon fibre reinforced plastic and aluminum single-lap adhesive joints after the transverse pre-impact

Xinglong Liu, Gang Zheng, Quantian Luo, Qing Li,Guangyong Sun.
International Journal of Fatigue, 144.
DOI: https://doi.org/10.1016/j.ijfatigue.2020.105973
Experimental investigation into stamping of woven CF/PP laminates: Influences of molding temperature on thermal, mesoscopic and macroscopic properties

Guangyong Sun, Xiangren Kong, Zhen Wang, Quantian Luo,Qing Li.

Composite Structures, 263.

DOI: https://doi.org/10.1016/j.compstruct.2020.113507
Modal identification of vibrating structures using singular value decomposition and nonlinear iteration based on high-speed digital image correlation

Guangyong Sun, Wenju Li, Quantian Luo, Qing Li.

Thin-Walled Structures, 163.

DOI:https://doi.org/10.1016/j.tws.2020.107377
A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds

C. Wu, J. Fang, A. Entezari, G. Sun, M. V. Swain, Y. Xu, Q. Li.
J Biomech, 117, 110233
DOI:https://doi.org/10.1016/j.jbiomech.2021.110233
A path-dependent level set topology optimization with fracture criterion

Chi Wu, Jianguang Fang, Shiwei Zhou, Zhongpu Zhang, Guangyong Sun, Grant P. Steven,Qing Li.
Computers & Structures, 249.
DOI:https://doi.org/10.1016/j.compstruc.2021.106515
On design of carbon fiber reinforced plastic (CFRP) laminated structure with different failure criteria

Yanan Xua, Yunkai Gao, Chi Wu, Jianguang Fang, Guangyong Sun, Grant P Steven, Qing Li
International Journal of Mechanical Sciences, 196, 106251
DOI：https://doi.org/10.1016/j.ijmecsci.2020.106251
On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests

Gang Zheng, Zongkai He, Kai Wang, Xinglong Liu, Quantian Luo, Qing Li, Guangyong Sun
Thin–Walled Structures, 158.
DOI：https://doi.org/10.1016/j.tws.2020.107184
On multiaxial failure behavior of closed-cell aluminum foams under medium strain rates

Erdong Wang, Guangyong Sun, Gang Zheng, Qing Li
Thin-Walled Structures, 160.
DOI：https://doi.org/10.1016/j.tws.2020.107278
On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy

Guangyong Sun, Xuguang Xia, Xinglong Liu, Quantian Luo, Qing Li
Thin-Walled Structures, 164.
DOI：https://doi.org/10.1016/j.tws.2021.107657
On the effects of temperature on tensile behavior of carbon fiber reinforced epoxy laminates

Guangyong Sun, Wen Zuo, Dongdong Chen, Quantian Luo, Tong Pang, Qing Li

Thin-Walled Structures, 164.
DOI：https://doi.org/10.1016/j.tws.2021.107769

首页上页 12 下一页末页